How nice and warm it becomes in the apartment after replacing the usual wooden windows with plastic ones. But after installing the windows, the slopes have a disgusting appearance and therefore they should be sheathed with a finishing material, for example, plastic.

Plastic in all hardware stores can be easily selected for any color and almost any width can be selected. Slopes that are too wide are rare, and even the widest plastic strip turns out to be narrow. In this case, the strip will have to be attached not vertically, but horizontally from several pieces.

It should be noted that plastic is the main material, but there are also a number of related materials that are necessary for covering slopes.

[b]Required material[/b]
Plastic, starting strip, inner plastic corner, F-shaped plastic strip, wooden slats. All the material is purchased according to the size of the slopes. It should also be noted that all plastic components can be varied in different colors, but it is much more beautiful when all the material is the same color.

[b]Making slopes[/b]
A starting strip is attached to the edge of the window, to the window itself. It is fixed with screws, 20 cm apart. The starting strip is fixed around the entire perimeter of the window, of course, except for the lower part, that is, on the left, right sides and on the top. A smooth wooden beam is fixed to the edge of the inner part of the slope and an F-shaped strip is attached to it, along the entire perimeter of this window opening. Make sure that the bar is perfectly level, as the smoothness of the flexible plastic strip depends on it. The F-shaped strip is attached with a wide edge to the room and a narrow edge to the window opening. This should result in a frame with slots for plastic, where the slots are located on the window and the edge of the slope.

However, in order for the plastic to fit well everywhere, you need to insert an inner plastic corner at the top of the slope on the left and right sides. This corner will serve as a connecting part for the side and top plastic sheets.

After fixing all the holding parts, the plastic is cut to the desired size with a tolerance for grooves. The plastic is inserted into the grooves by bending the edges of those same grooves. If, when inserting plastic, the grooves have to be bent too far, then it is better to trim the plastic strip, because if the plastic is bent too much, it may break. It is best to cut the strips one at a time, that is, after cutting off one, you need to insert it and only after that you can cut off the other. This is necessary because plastic strips are quite flexible and it is impossible to bring the process to perfect accuracy.

Plastic slopes are suitable in any reputable establishment, as the window is significantly transformed and looks very beautiful. Le succès phénoménal de ce bookmaker en Afrique francophone s'explique par sa capacité à proposer des offres adaptées aux besoins des joueurs locaux. Grâce à un code promo 1xbet gratuit les nouveaux inscrits peuvent bénéficier d'un bonus sportif de 100% jusqu'à 130€ ou d'un package casino de 1950€ avec 150 tours gratuits. Cette stratégie marketing agressive a permis à la plateforme de s'imposer dans des pays comme le Sénégal, la Côte d'Ivoire, le Cameroun, le Maroc et la Tunisie.